Digital Survival Kit PRO 20mm 1,3xFaktor - T1

Everything you need for a proper cleaning!

The kit contains:

12 sensor swabs (of either type 1, 2 or 3)
4 e-wipe wipe
25 pcs. PEC * PAD (Lint free soft disposable cloths)
1 pc magnifier with light (incl. Batteries)
1 x Soft Hoff anti government brush
1 bottle of Eclipse / E2 (59ml)
Everything comes in a practical nylon bag with zipper.

E-Wipe and Eclipse - Warning
E-Wipe and Eclipse contains Methanol is highly flammable!
The product burns without a visible flame. Keep away from heat, flames, sparks and other things that can cause ignition. Avoid contact with eyes. Irritation and itching can occur. In case of contact with eyes, rinse well with clean water. Harmful if swallowed, induce vomiting. Avoid breathing vapor. May cause dizziness, headache and nausea. Use only in well ventilated areas. See any www.photosol.com/msds for more information.

Eclipse can be used both CCD and CMOS chips. In addition, Eclipse also be used for lens and filter cleaning.

See HERE for a list of what is suitable for your camera.

Instructions for cleaning the lenses with PEC * PAD and Eclipse: Eclipse Pour a few drops on a clean, folded PEC * PAD and lightly wipe the surface. Dry in a direction. Fold again to have a clean side and wipe again if necessary. Do not use on DSLR sensors.
Instructions for cleaning the lenses with E-WIPE: Wash your hands well. Open the package. Unfold the cloth and wipe the lens in a circular motion from the center of the lens outwards. Do not use on DSLR sensors.

Instructions for Sensor Swab with Eclipse:
1 See the camera manual for how to access the sensor.
2 Turn on the camera so you can see the sensor.
3 Remove the plastic wrapping from Sensor Swab'en. Do not remove the rubber band or the soft material.
4 Pour a few drops of Eclipse or E2 in a new Sensor Swab.
5 With a gentle pressure, and in a continuous motion, recorded sensor Swab'en over the sensor chip.
6 Turn Sensor Swab'en and repeat cleaned by passing it the opposite way over the sensor chip.
7 Release the camera's shutter and replace the lens
Repeat steps 3 through 6 if necessary. Use when a new Sensor Swab